LED DC 5V 9V 12V 15V 24V Cycle Delay Timer Turn On/OFF Time Relay Switch Module

Description

Description
Welcome to our store:
DIY_happy
Tips:
If you need Large quantity, please contact us, we can wholesales.
Specifications:
Notes: with cover version available.
Features:
1.Trigger, cycle, timing, delay switch circuit, MCU control, digital LED and programmable.
2. Dual MOS tube switch control board, no-sounds, and low resistance, lower consumption, better than relay switch.
3. 0.1 seconds (min) to 999 minutes (max) continuously adjustable.
4. Can off the display automatically.
5. To achieve fast turn-on and off the circuit, an unlimited number of switching;
6.Conducting and cutting process does not produce noise, no spark, no electromagnetic interference;
7.Compared with electromagnetic relay products, longer life;
8.The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature,
operating current of up to 15A, power up to 400W, to meet the most use of the equipment;
9.This product is easy to use, many functions, widely used. A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient.
Newest Version: add more working mode and more stable.
1. Wide voltage input (5-36V), most devices can be used, very convenient;
2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
3. The emergency stop function (“STOP” key);With reverse polarity protection, reverse polarity will not burn the product.
4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes,
then automatically turn off the monitor, any key wake-up;
5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
6. After the module is powered down, all parameter settings are not lost.
7. Count-down digital LED display, easy to read.
Product Parameters:
1: Operating voltage: 5--36V.
2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation,
can improve the system's anti-jamming capability (customers can also shorting common ground).
3: Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W!
Enhance heat dissipation conditions, the maximum current up to 30A.
4: Quiescent Current: 20mA; Operating Current: 50mA
5: Life: any switching times; Working temperature: -40-85
℃
; Size: 6.0*3.4*1.2cm.
6: With optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Attention:
1. The module is an active output, the output voltage equal to the input voltage.
2.'DC + 'and' load + 'This is an internal short circuit of the poles, but' DC- 'and' load - 'poles during use can not be shorted,
otherwise the load can not be controlled on and off, which is equivalent load is been carrying electricity.
Operating Mode:
P1: delay turn off mode
trigger signal, the relay is on
"OP"
time, and then disconnect; during "OP" time, as follows:
P1.1: signal is triggered again, invalid
P1.2: signal is triggered again, the clock is reset
P1.3: Signal trigger again, relay off, stop the clock;
P1.4: no need trigger, the timer run when power on.
P-2: trigger-->delay "CL" time-->turn on "OP" time--> turn off.
trigger signal, the relay off "CL" of time, the relay on "OP" time, and then disconnect relay;
during the count-down,
P2.1: signal is triggered again, invalid
P2.2: signal is triggered again, the clock is reset
P3: Cycle turn on "OP" time & turn off "CL" time:
the number of cycles ( "LOP ") can be set.
P3.1:
trigger signal, the switch is turned on the "OP" time, then the switch off "CL" time, and cycle operation,
If the trigger signal period, the relay off, stop the clock;
P3.2:
No need trigger signal, the switch is on "OP" time, the relay off "CL" time, and has been cycling;
P-4: signal holding function
. If there is a trigger signal timing is cleared, the relay remains on;
when the signal disappears, after the timing "OP" time, the switch is off; if another signal during timing, timing is cleared;
Usage:
Step1: slect working mode.
Long press "SET" key for 2 second, display show working mode, click
Up
/
Down
change, and click "
SET
" to confirm and next.
Step2: set delay time or cycle times.
LED show 0P then show number, click
UP
/
DOWN
change, and click
Stop
to select time range.
and click "SET" to confirm and next.
When LED show CL then show number, click
UP
/
DOWN
change, and click
Stop
to select time range.
and click "SET" to confirm and next.
When LED show LOP then show number, click
UP
/
DOWN
change, and click
Stop
to select time range.
and click "SET" to confirm and next.
Step 3:
Long press "SET" 2 second to save setting.
Active and de-active Sleep mode:
"C-P" Sleep mode: five minutes without any operation,
the digital display automatically turns off, the program running as usual;
"O-d" normal mode: digital display always open;
Press the "STOP" button for two seconds and then release to switch "C-P" and "O-d" state,
in which the current state of flashes and then return to the main screen.
How to choose the time range?
After setting the mode selection screen parameter value by a short press "STOP" button to select the time range;
XXX. decimal point in the unit place, time range: 1 second to 999 seconds.
XX. X decimal point in decade place, Timing range: 0.1 seconds to 99.9 seconds
X. X. X. decimal full brightness, Timing range: 1 minute to 999 minutes.
For example:
you want to set "OP" is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2
Parameter description:
"OP" - conduction time, "CL" - off time, "LOP" - the number of cycles (1-999 times, "---" represents infinite loop).
These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time "OP" is 5 seconds, if you switch to P1.2 mode, it's "OP" will be 5 seconds too.
In the main interface (display 000), short press "SET" button will display "OP" ( "CL", "LOP") and the corresponding time XXX;
Some parameters only mode "OP" (such as the mode P1.1, P1.2, P1.3), short press the "SET" key to display only the “OP” and the corresponding time;
Some models have parameters "OP", "CL", "LOP" (such as the mode P3.1, P3.2), short press "SET" button will display "OP" and the corresponding time, “CL” and the corresponding time, “LOP” and the corresponding number of times;
In the main interface by short press "SET" key to see information about the parameters of the current mode, very convenient!
Payment
We only accept payment via Paypal.
The buyer is responsible for any applicable import duties and local taxes.
Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.
Delivery details
The items will be shipped within 1~2 working days after your payment is received and cleared.(excluding Saturday, Sunday & Holiday)
All items will be shipped to your Paypal address, so please make sure to provide us with the correct, precise, detailed shipping address.
The Delivered time to USA buyer is about 7~20 days, other country about
15~35
days delivered.
Notes: pls contact us if you need need trackable or express shipping service.
Terms of sales
All the items will be tested before shipping. Buy them with the confidence!
We maintain the excellent service standards
and strive for 100% customer satisfaction and
Positive feedback.
If you have any problem, please do feel free to contact us before leave Neutral
or Negative
feedback, so that we can satisfactorily address your concerns.
Return
We afford all cost if it's our fault. Exchange or refund.
Contact us
We strive to provide you with the best service, reply your question within 24 hours.
Business time:
9:30~21:30 (GMT+8)
exclude the weekend and holidays.
Contact us